Table of Contents
Advertisement
SNMP Traps (Management and Communication Options)
Select SNMP Traps to configure desired SNMP traps and dialing out when SNMP traps
occur.
SNMP Traps
Configuration Option
SNMP Traps
Number of Trap Managers
NMS n IP Address
Initial Route Destination
General Traps
Enterprise Specific Traps
Link Traps
Link Traps Interfaces
Ethernet Management (Management and Communication Options)
Select Ethernet Management to configure the unit's Ethernet port.
Ethernet Management
Configuration Option
Interface Status
IP Address
Subnet Mask
Default Gateway Address
Settings
Enable, [Disable]
[1]–6
001.000.000.000–223.255.255.255, [Clear]
[AutoRoute], Ethernet, COM
Disable, Warm, AuthFail, [Both]
[Enable], Disable
Disable, Up, Down, [Both]
Network, T1s, Ports, [All]
Settings
Enable, [Disable]
001.000.000.000–223.255.255.255, [Clear]
[000.000.000.000] – 255 . 255.255.255 , Clear
001.000.000.000–223.255.255.255, [Clear]
18
Default in [Bold]
Default in [Bold]
Advertisement
Table of Contents
