Table of Contents
Advertisement
Connecting to the Ethernet LAN
Procedure
1. Insert one 8-pin connector of the Ethernet cable into the Ethernet port.
2. Insert the other end of the cable into the Ethernet interface of the LAN where the
NMS resides.
COM
POWER
3. Check Health and Status messages in the left column of the System and Test
Status screen to verify that there are no Ethernet-related Health and Status
messages.
Main Menu
If the Ethernet Link Down message appears, make sure both ends of the
Ethernet cable are properly seated.
ETHERNET
P
O
R
T
Status
System and Test Status
NET
NMS
LAN
00-16687
7
Advertisement
Table of Contents
