Configuration Options
General
Select System Options, then General to configure a timeout period and duration for
user-initiated loopbacks and pattern tests, and a primary clock source for the system.
General
Configuration Option
Test Timeout
Test Duration (min)
Primary Clock Source
Network
Select Network, then Physical to configure physical characteristics for the T1 network
interface.
Network
Configuration Option
Line Framing Format
Line Coding Format
Line Build Out (LBO)
Bit Stuffing
Network Initiated LLB
Network Initiated PLB
ANSI Performance Report
Messages
Excessive Error Rate Threshold
Circuit Identifier
Settings
[Enable], Disable
1–120
[10]
[Net1], Internal
Settings
D4, [ESF]
AMI, [B8ZS]
[0.0], –7.5, –15, –22.5
[62411], Disable
[Enable], Disable
[Enable], Disable
Enable, [Disable]
[10E-4], 10E-5, 10E-6, 10E-7, 10E-8, 10E-9
Text Field, [Clear]
15
Default in [Bold]
Default in [Bold]