Table of Contents
Advertisement
Data Ports
Select Data Ports, then Physical to configure physical characteristics for the user data
port, which is connected to a DTE.
Data Ports
Configuration Option
Port Base Rate (Kbps)
Invert Transmit Clock
Transmit Clock Source
Monitor RTS (Control)
Monitor DTR
Port (DTE) Initiated Loopback
Network Initiated Data Channel
Loopback
Time Slot Assignment
Select Sync Data Port Assignments under the Time Slot Assignment configuration
branch to assign DS0s on the T1 network interface.
Sync Data Port-to-Network Interface Time Slot Assignment
Network Channel
N01–N24
Node IP (Management and Communication Options)
Select Node IP to configure support of the IP communication network.
Node IP
Configuration Option
Node IP Address
Node Subnet Mask
Default IP Destination
Settings
[Nx64], Nx56
[Auto], Enable, Disable
[Internal], External
[Enable], Disable
[Enable], Disable
[Disable], Local
[Disable], V.54, ANSI_FT1, V.54_&_ANSI
Settings
[Available], Port1
Settings
001.000.000.000–223.255.255.255, [Clear]
[000.000.000.000]–255.255.255.255, Clear
[None], COM, Ethernet
16
Default in [Bold]
Default in [Bold]
Default in [Bold]
Advertisement
Table of Contents
