2.9.4
Learning sequenced infrared codes
Multiple infrared codes can be learned for a single command in the infrared
setup menu. This enables multiple infrared codes to be transmitted through a
single command when in infrared mode.
Examples:
1.
The on/off function for multiple appliances, the TV and the DVD for
example, can be learned by a single entry in the infrared setup menu. The
control panel will then transmit the codes for the learned command in one
burst. In this case, turning on or off the TV set and the DVD recorder
practically simultaneously.
2. Previously, selecting a TV channel required the user to select the
individual channel's digits from a list. This could be quite inconvenient
when trying to select a TV channel with multiple digits for example 143.
Now the individual codes for the numbers 1, 4, and 3 can be learned by a
single command in the infrared setup menu. When this command is
selected in the infrared setup menu, the infrared codes are transmitted
practically simultaneously.
Power Platform Joystick Module for R-net - 55
Need help?
Do you have a question about the Power Platform R-net and is the answer not in the manual?