Table of Contents
Advertisement
2.8.2
Pairing setup
This section describes the setup to pair a Bluetooth device with your
wheelchair.
In the Bluetooth settings menu:
• Turn on Bluetooth.
This activates Bluetooth mode on your wheelchair.
• Turn on Allow pairing.
This makes your wheelchair discoverable for nearby Bluetooth devices.
• The Bluetooth icon starts to flash in the upper right corner of the display
when your wheelchair can be discovered by other Bluetooth devices.
• Stay in this menu to pair a Bluetooth device with your wheelchair. See
2.8.3 Pairing with a device.
Bluetooth
<On>
Allow pairing
<On>
Exit
>
Power Platform Joystick Module for R-net - 39
Advertisement
Table of Contents
Need help?
Do you have a question about the Power Platform R-net and is the answer not in the manual?