Pairing With A Device - Permobil Power Platform R-net User Manual

Hide thumbs Also See for Power Platform R-net:
Table of Contents

Advertisement

2.8.3

Pairing with a device

Turn on Bluetooth in the device you want to pair with your wheelchair.
In the device's Bluetooth settings menu:
• Turn on Bluetooth.
• Select Add Bluetooth device.
• Wait until Permobil shows up in the list of nearby Bluetooth devices.
• Then click on Permobil to pair the device with your wheelchair.
In the control panel's Bluetooth settings menu:
• The device's ID will show up in a new list on this screen under Mouse/Key
devices and the Bluetooth icon will stop flashing.
• If the device's ID does not show up after 30 seconds, exit the current menu
and open it again.
• After a device has been successfully paired, the setting for Allow pairing
will automatically turn off.
The device will still be paired with the wheelchair when the wheelchair has
been turned off and on. Each time you connect your wheelchair with the
device again, the Bluetooth icon flashes before it becomes solid. The device
might be ready to use before the symbol is solid.
40 - Power Platform Joystick Module for R-net
Bluetooth
<On>
Allow pairing
<Off>
Mouse/Key devices:
My iPhone
>
>
Exit

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Power Platform R-net and is the answer not in the manual?

Subscribe to Our Youtube Channel

This manual is also suitable for:

Pjsm

Table of Contents