Permobil PJSM Quick Start Manual
Permobil PJSM Quick Start Manual

Permobil PJSM Quick Start Manual

Joystick module bluetooth mouse emulation for pc, mac & android phone or tablet
Hide thumbs Also See for PJSM:

Advertisement

Permobil Joystick Module quick start guide
Bluetooth™ mouse emulation for PC, Mac & Android phone or tablet

Activating Bluetooth mode

1. From drive mode, press and hold soft key #1 (top
left blue button) to enter settings menu.
2. Using joystick, scroll down to "Bluetooth", right
command of joystick to select.
3. Scroll to desired Bluetooth device ("R-net Mouse 1" or
"R-net Mouse 2"), right or left command to turn <on>.

Pairing Permobil Joystick Module with device

1. Press and hold soft key #3 (top right blue button) to
enter Bluetooth Mode ("M3"). Option to use power/
mode toggle to access Mode 3.
2. Scroll to R-net Mouse 1 or R-Net Mouse 2 and select
desired device with right command of joystick.
3. Put in discoverable mode by holding joystick
forward for 15 seconds or until you hear a beep,
Default settings in "Mouse Mode"
Softkey #2 – Short hold is left click; long hold is double left click
Softkey #3 – Short hold is return to drive mode ("M1")
Softkey #4 - Short hold is right click; long hold takes you to home screen on an android device
Speed toggle up/down long command = Scroll up/down
www.permobil.com
4. Scroll down to "Exit", right command back to
settings menu.
5. Scroll to "Exit" at bottom of settings menu, right
command to "Exit".
6. Power chair off/on twice.
repeat by holding joystick in reverse for 15
seconds or until you hear a second beep.
4. Enter Bluetooth settings on device being paired,
and search for new device. Pair with "R-net Mouse
1" or "R-net Mouse 2". If prompted for a passcode,
enter 0000.
DOC0057-01

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PJSM and is the answer not in the manual?

Questions and answers

Summary of Contents for Permobil PJSM

  • Page 1 Permobil Joystick Module quick start guide Bluetooth™ mouse emulation for PC, Mac & Android phone or tablet Activating Bluetooth mode 1. From drive mode, press and hold soft key #1 (top 4. Scroll down to “Exit”, right command back to left blue button) to enter settings menu.
  • Page 2 “Bluetooth” should show in Omni user menu. User Joystick Module (PJSM), he/she will need to memorize will select “Bluetooth” from user menu through right order of devices on the PJSM, and count beeps to command of alternative drive control. know what device is active.

Table of Contents