Safety Feature; 2.6.12 In Focus - Permobil Power Platform R-net User Manual

2.6.11

Safety feature

This symbol means that a safety feature has been triggered. One example of a
safety feature is when the motor temperature gets too high.
This safety feature reduces the power to the motors, and automatically resets
after a certain period of time.
When the system is reset, the symbol disappears. When this symbol occurs,
drive slowly or stop the wheelchair. Permobil recommends that you drive
slowly for a short period after the symbol has disappeared, to prevent
unnecessary strain on the wheelchair.
If the symbol occurs multiple times and the wheelchair is not driven in any of
the conditions mentioned in the chapter Driving restrictions of your
wheelchair's user manual, there might be something wrong with the
wheelchair. Contact your service technician.

2.6.12 In focus

When the control system has more than one method of direct control, such as
a secondary joystick module or a dual attendant module, then the module that
has control of the wheelchair will show the 'in focus' symbol.
Power Platform Joystick Module for R-net - 29