Function Buttons - Permobil Power Platform R-net User Manual

2.3.4

Function buttons

Four function buttons are located on the left and right sides of the display.
The symbols on the screen show the current function.
2.3.4.1 Hazard lights and seat lift
This button controls the wheelchair hazard lights if your wheelchair is
equipped with lights, and the seat lift if this function is programmed for your
control panel.
The hazard lights are used when the wheelchair is positioned such that it
constitutes an obstruction for others. When the hazard lights are on, a symbol
on the screen will flash in sync with the wheelchair's hazard lights.
This is how you turn on and off the hazard lights.
1. Press the button to turn on the hazard lights.
2. Press the button again to turn off the hazard lights.
This is how you control the seat lift.
1. Press and hold the button to lift the seat to the preferred position.
2. Press and hold the button again to lower the seat to the preferred
position.
Power Platform Joystick Module for R-net - 11