Installing Lte/5G Module Card (Optional) - Lanner VP-501 User Manual

VP-501 User Manual

Installing LTE/5G Module Card (Optional)

The motherboard provides one M.2 slot for an LTE/5G module card expansion. An LTE module will require two
(2) antennas, and a 5G module requires four (4) antennas. Please follow the steps for installation.
The LTE/5G Module Card Kit contains the
following:
1x LTE/5G Module Card
2x or 4x SMA to IPEN Cables
2x or 4x Antennas
1. Power off the system and open the
chassis cover.
2. Locate the M.2 slot on the motherboard.
3. Align the notch of the LTE/5G module card
with the socket key in the pin slot.
4. Insert at 30 degrees into the socket until it
is fully seated.
5. Vertically push down on the module card
and secure it with one (1) screw.
5G/LTE
Antennas
Module Card
26
Cables
Notch