Logging Out Of The User Interface - SMA SUNNY TRIPOWER CORE2 Operating Manual

10 Operation
Adjusting of parameters that are not described will void the warranty
After logging in as Service provider, parameters can be set that can affect the function of the
inverter and the overall system. Adjusting these parameters can result in the damage of system
components or in unwanted system behavior. Adjusting parameters other than those described in
the documentation will void the warranty.
• After logging in on the user interface as Service provider, only adjust the parameters
described in the documentation as described in the documentation.
• Only change parameters if necessary.
Requirements:
☐ The user interface is called up (see Section 10.1, page 55).
Procedure:
1. Click on [Login] in the top right.
2. Enter the password in the field Password. The standard password for the user group Service
provider is pw8888.
3. Click on [Login].

10.3 Logging out of the user interface

Requirements:
☐ You are logged in on the user interface (see Section 10.2, page 56).
Procedure:
1. Click on the menu User settings
2. Select [Logout] in the drop-down list.
58 STP110-60-BE-en-16
NOTICE
in the top right.
SMA Solar Technology AG
Operating manual