Notice To User - RITE-HITE Revolution 25 Series Installation/Service/Owner's Manual

®
Revolution 25, 75, 150 Series HVLS Fans

NOTICE TO USER

READ AND SAVE THESE INSTRUCTIONS.
Thank you for purchasing a Rite‑Hite product.
The Revolution 25, 75, and 150 Series fans are
high‑volume/low‑speed (HVLS) direct drive fans.
Read and understand manual prior to installation or
operation of this equipment.
The English version of this manual shall prevail over any
error in, or conflicting interpretation of, any translations.
Rite‑Hite reserves the right to substitute and/or modify
parts and drawings. If separate prints are included with
the unit, they supersede those contained in the manual.
For best results, have this product serviced by an
authorized Rite‑Hite representative.
A Planned Maintenance Program (P.M.P.), customized to
your specific operation is available and recommended.
For a P.M.P., contact your local Rite‑Hite representative
or Rite‑Hite technical support at (U.S.) 888‑456‑3625,
(S.A.) +55 21 99616 4421, (E.U.) +49‑5693 98700.
The Rite‑Hite ® products in this manual are covered by one or more of
the following U.S. patents: 7658232, 8622712, 8142156, D631536,
7726945 and may be covered by additional pending U.S. and foreign
patent applications.
Manufactured by Rite‑Hite Engineered Solutions Group, Inc.
2
Installation/Service/Owner's Manual
FCC Compliance


NOTE:
limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area
is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.


NOTE:
responsible for compliance could void the user's authority to operate the
equipment.
Contains FCC ID: MCQ‑XB900HP
Contains IC: 1846A‑XB900HP
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including
interference that may cause undesirable operation.
This equipment has been tested and found to comply with the
Changes or modifications not expressly approved by the party
Publication: AMEN00190 2021-09-24
®
Rite‑Hite