Bose ControlSpace ESP-88C Service Manual page 9

Signal Processing
Type:
Clock Speed:
Maximum Calculation:
Delay Memory:
Audio Latency:
Sampling Rate:
Control Inputs
Type:
Connectors:
Analog Input:
Digital Input Voltage Range:
Control Outputs
Type:
Connectors:
Output Voltage:
Output Current:
Communication Ports
LAN:
RS-232C:
RS-485:
Indicators
Status:
Audio:
SPECIFICATIONS
32-bit floating-point digital signal processor(s)
200MHz
1600 MIPS/1200 MFLOPS
(6400 MIPS/4800 MFLOPS with DSP option card)
16MByte/72s (maximum)
(64MByte/288s maximum with DSP option card)
610us (analog in to analog out) (860us with DSP option card)
48kHz
8 analog or digital inputs, 5.1k ohms internal pull-up resistor
to 5V
Phoenix/Euroblock 2-piece, 9-pin 3.81mm pitch
0V to 3.3V (max 5V; suitable for 10k ohm variable resistor)
0V to 3.3V (threshold voltage = 1.6V; internal 5.1k ohms pulled
up to 5V)
8 digital outputs, 10k ohms internal pull-up resistors to 5V
Phoenix/Euroblock 2-piece, 9-pin 3.81mm pitch
0V to 5V open collector
0.5mA (source)/10mA max (sink)
10Base-T (RJ-45)
D-sub 9 pin, male; DTE
Phoenix/Euroblock 2-piece, 3-pin
Power/Status/Ethernet/Serial (RS232C + RS485)
Signal (Present/Normal/Clip) for each audio input and output
9