Overview; Dismantling The Wirefeeder Mount And Gas Cylinder Holder - Fronius TPS 2700 Operating Instructions Manual

Overview

(5)
(4)
Auto-transformer conversion kit
(1)
(2)
(3)
(4)
(5)
(6)
(7)
* for TPS 3200/5000 600/575 - 460 V only
** for TPS 3200/5000 600/575 - 460 V only
Dismantling the
wirefeeder
mount and gas
cylinder holder
(8)
Removing the wirefeeder mount
1 x TPS 2700/TPS 3200/TPS 5000 auto-transformer
1 x Main device switch
* 1 x Fan slow-blow fuse 0.4 A (6.3 x 32 mm = 0.248 x 1.261 in.)
** 1 x Extension plate for gas cylinder holder on „PickUp" trolley
** 4 x „ExtrudeTite" screws
4 x Allen screws
4 x Hexagon nuts
Turn the power source mains
1
switch to the „O" position
Pull out mains plug
(9)
2
Unscrew wirefeeder mount (9)
3
from the gas cylinder holder (8)
Pivot wirefeeder mount (9) up-
4
wards, unhook from the power
source and remove
Remove safety strap from the gas
5
cylinder holder (8)
(6)
(7)
(1)
(2)
(3)
45