Overview
Therm-O-Flow Plus Accessory Zone
Controls
Therm-O-Flow Plus Accessory Zone Controls are
typically used to add more heat zones to an existing
Therm-O-Flow Plus system. As an example, a user
may have a Therm-O-Flow Plus system with six heat
zones (pump, plate, 2 hose zones, and 2 gun/access
zones). There is a need to add more hoses to the
system because of a long fluid run from the unloader
to the dispense point. An accessory 2- or 4-zone
control can be added to the system to heat additional
zones beyond the six of the system unloader. When
properly connected with appropriate communication
cables, the Enhanced Programming Pendant of the
Therm-O-Flow Plus system can recognize the main
system unloader as well as the accessory zones.
6
309213