Table of Contents
Advertisement
INJECTION HAZARD
Fluid from the spray gun/dispense valve, hose leaks, or ruptured components can inject fluid into
your body and cause extremely serious injury, including the need for amputation. Splashing fluid in
the eyes or on the skin can also cause serious injury.
D Fluid injected into the skin might look like just a cut, but it is a serious injury. Get immediate
surgical treatment.
D Do not point the gun/valve at anyone or at any part of the body.
D Do not put your hand or fingers over the spray tip/nozzle.
D Do not stop or deflect fluid leaks with your hand, body, glove, or rag.
D Always have the trigger guard on a spray gun if you are spraying.
y
D Check the gun diffuser operation weekly (if so equipped). Refer to the gun manual.
D Be sure the gun/valve trigger safety operates before dispensing.
D Lock the gun/valve trigger safety when you stop dispensing.
D Tighten all fluid connections before operating the equipment.
D Check the hoses, tubes, and couplings daily. Replace worn, damaged, or loose parts immedi-
ately. Do not repair high pressure couplings; you must replace the entire hose.
TOXIC FLUID HAZARD
Hazardous fluid or toxic fumes can cause serious injury or death if splashed in the eyes or on the
skin, inhaled, or swallowed.
D Know the specific hazards of the fluid you are using.
D Store hazardous fluid in an approved container. Dispose of hazardous fluid according to all
local, state and national guidelines.
D Always wear protective eyewear, gloves, clothing and respirator as recommended by the fluid
and solvent manufacturer.
D Avoid exposure to heated material fumes.
D Provide adequate ventilation.
PRESSURIZED FLUID HAZARD
Bursts of material and air will exit the bleed port! To reduce the risk of serious injury or dam-
age to equipment, wear eye protection and protective clothing whenever working with this supply
system.
4
309213
WARNING
gg
g
p y g
y
p y g
Advertisement
Table of Contents
