KTM 150 EXC 2024 Owner's Manual page 80

12 SERVICE WORK ON THE CHASSIS
78
–
Mount and tighten screws
Guideline
Screw, fuel tank
spoiler on radiator
–
Remove the wash cap set.
–
Clean the quick release coupling thoroughly with compressed
air.
Info
I00436-10
Under no circumstances should dirt enter into the fuel
line. Dirt in the fuel line clogs the injection valve!
–
Clean the quick release coupling thoroughly with compressed
air.
Info
Under no circumstances should dirt enter into the fuel
line. Dirt in the fuel line clogs the injection valve!
–
Lubricate the O-ring and join quick release coupling
Info
Route the cable and fuel line at a safe distance from
the exhaust system.
–
Spray silicone spray onto a lint-free cleaning cloth and lightly
lubricate the O-ring of the quick-release coupling.
Silicone spray (
–
Join quick release coupling
–
Attach fuel tank breather hose
–
Plug in fuel pump connector
I00437-10
Finishing work
–
Mount the seat. (
2
with the collar bushings.
M6 6 Nm (4.4 lbf ft)
p. 160)
3
.
4
.
5
.
p. 69)
3
.