–
Remove screws
the handlebar and lay it to one side.
Info
Cover the components to protect them against damage.
Do not kink the cables or lines.
–
Remove screws
–
Place the handlebar support in the required position. Mount
and tighten screws
Guideline
Screw, handle-
bar support
Info
Position the left and right handlebar supports evenly.
–
Position the handlebar.
Info
W00324-10
Make sure the cables and wiring are positioned cor-
rectly.
–
Position the handlebar clamp. Mount screws
evenly.
Guideline
Screw, handlebar
clamp
Info
Make sure the installed gaps are even.
TUNING THE CHASSIS 11
1
. Take off the handlebar clamp. Take off
2
. Take off the handlebar support.
2
.
M10
40 Nm (29.5 lbf ft)
M8
20 Nm (14.8 lbf ft)
Loctite
®
243™
1
and tighten
57