Table of Contents
Advertisement
–
Check whether air bubbles are visible in the hose
»
If air bubbles are visible:
–
Repeat the entire procedure until air bubbles are
no longer visible.
–
Mount the diagnostics connector on the holder.
–
Mount the engine control unit on the rubber lugs.
I00454-10
(150 XC‑W US)
–
Remove protection cap
I00451-10
–
Put throttle grip
I00452-10
–
Plug in wake-up connector
the diagnostics connector
The combination instrument lighting is activated.
Info
The connector is included as part of the motorcy-
cle's separate enclosure.
–
Wait for at least five seconds.
–
Release the fixing from the throttle grip.
The oil pump is timed.
Info
The oil pump is actuated at various speeds.
The procedure is clearly audible.
–
Wait until you can no longer hear the oil pump operating.
–
Disconnect the wake-up connector from the diagnostics
connector.
I00455-10
SERVICE WORK ON THE ENGINE 19
1
of the diagnostics connector.
2
into full throttle position and secure.
3
for priming the oil pump to
4
.
5
.
133
Advertisement
Table of Contents
