19 SERVICE WORK ON THE ENGINE
132
Preparatory work
–
Remove the seat. (
–
Stand the motorcycle upright on a horizontal surface.
–
Check 2-stroke oil level. (
Main work
(150 EXC EU)
–
Pull diagnostics connector
I00451-10
–
Put throttle grip
I00452-10
–
Plug in wake-up connector
the diagnostics connector
The combination instrument lighting is activated.
Info
The connector is included as part of the motorcy-
cle's separate enclosure.
–
Wait for at least five seconds.
–
Release the fixing from the throttle grip.
The oil pump is timed.
Info
The oil pump is actuated at various speeds.
The procedure is clearly audible.
–
Wait until you can no longer hear the oil pump operating.
–
Disconnect the wake-up connector from the diagnostics
connector.
I00453-10
p. 69)
p. 131)
1
off the holder.
2
into full throttle position and secure.
3
for priming the oil pump to
4
.