–
Position the upper triple clamp and handlebar.
–
Position the clutch line and the wiring harness.
–
Mount screw
W00353-11
–
Position the fork legs.
Bleeder screws
Info
Grooves are milled into the side of the upper end of the
fork legs. The second milled groove (from the top) must
be flush with the upper edge of the upper triple clamp.
W00297-13
–
Tighten screws
Guideline
Screw, bottom triple
clamp
W00341-13
–
Tighten screw
Guideline
Screw, top steering
head
–
Tighten screw
Guideline
Screw, top steering
stem
W00339-12
–
Tighten screws
Guideline
Screw, top triple
clamp
W00341-12
SERVICE WORK ON THE CHASSIS 12
2
, but do not tighten it yet.
3
are positioned toward the front.
4
.
M8
2
.
M20x1.5
5
.
M8
6
.
M8
15 Nm (11.1 lbf ft)
12 Nm (8.9 lbf ft)
20 Nm (14.8 lbf ft)
20 Nm (14.8 lbf ft)
63