Information Menu - FLIR CM276 User Manual

6
Configuring the Meter
6.6.4.6 Bluetooth ON/OFF
1. To toggle Bluetooth ON or OFF, press OK at the Bluetooth sub-menu (Set-
tings > Device Settings > Bluetooth).
2. Press OK to confirm the selection. See Section 11 for additional informa-
tion on the METERLiNK mobile app that uses Bluetooth to share images,
video, and data log records.
6.6.4.7 Screen Brightness
1. Press OK at the Screen Brightness sub-menu (Settings > Device Settings
> Screen Brightness).
2. Use the up/down arrows to select Low, Medium, or High.
3. Press OK to confirm.
6.6.4.8 Data Log Sampling Rate
1. Press OK at the Log Sampling Rate sub-menu (Settings > Device Settings
> Log Sampling Rate).
2. Use the up/down arrows to set the sampling interval from 1 to 100
seconds.
3. Press OK to confirm.
See Section 9 for additional information on Data Logging.

6.6.5 Information Menu

The Information menu has two sub-menus, System Information and Reset
Options, as explained below. Press OK at the Information menu, use the ar-
row buttons to scroll to an option, and press OK to open it.
6.6.5.1 System Information Menu
In the System Information menu, scroll through the following data.
• Model number
• Serial number (S/N)
• Software version
• Build number
• Meter firmware version (FW)
• Bluetooth firmware version (BT FW)
• Storage status (memory total/memory used)
• Battery strength (%)
• Meter Calibration Date
• Infrared (IR) Calibration Date
#NAS100167; r. AA/95680/95684; en-US
23