Supervisor Level; Opening The Supervisor Level; Access Via Code; Change Code - Miele PDR 914 Operating And Installation Instructions

Supervisor level

Opening the Supervisor level


 
Programs Favorites
Help
Touching the  sensor button takes you to the Supervisor level.

Access via code

The supervisor level is accessed using a code.
Factory default: The code is 000.

Change code

You can alter the supervisor-level access code to protect the tumble dryer from unautho-
rized access.
Carefully enter a new code.
Please inform Technical Service if you have forgotten your new code. Technical Service
will have to reset the code.
Make a note of your new code and store it in a safe place.

Closing the settings menu

Touch the  sensor control.

The display will then go back to the previous menu level.
Touch the  sensor control.

The display will change to the main menu.

Controls / Display

Language

The display can be set to appear in one of several different languages. To select the lan-
guage you want, go to the Languages sub-menu.
You can change the language as follows:
- Permanently using the supervisor level (= "Supervisor language").
- For the duration of the current program only using the  sensor control. The supervi-
sor language is displayed again at the end of the program.

Language entry

The display can be set to one of several different user languages. This setting allows you to
determine how languages can be selected.
You can change the language as follows:
International
30
11:02

Supervisor