Supervisor Level; Opening The Supervisor Level; Access Via Code; Change Code - Miele PDR 914 SOM Operating And Installation Instructions

Opening the Supervisor level


 
Programmes Favourites
Help
Touching the  sensor control takes you to the Supervisor level.

Access via code

Supervisor level is accessed using a code.
Factory default: The code is 000.

Change code

You can alter the Supervisor level access code to protect the dryer from unauthorised ac-
cess.
Be careful when entering a new code.
You will need to inform Miele Service if you forget your new code. Miele Service will have
to reset the code.
Make a note of your new code and store it in a safe place.

Closing the settings menu

Touch the  sensor.

The display will then go back to the previous menu level.
Touch the  sensor.

The display will change to the main menu.

Controls / Display

Language

The display can be set to appear in one of several different languages. To select the lan-
guage you want, go to the Languages sub-menu.
You can change the language as follows:
- Permanently using the supervisor level (= "Supervisor language").
- For the duration of the current programme only using the  sensor control. The su-
pervisor language is displayed again at the end of the programme.

Language entry

The display can be set to one of several different user languages. This setting allows you
to determine how languages can be selected.
You can change the language as follows:
11:02

Supervisor
en - Supervisor level
99