Supervisor Level; Opening The Supervisor Level; Access Via Code; Change Code - Miele PDR 918 HP Operating And Installation Instructions

Opening the Supervisor level


 
Programmes Favourites
Help
Touching the  sensor takes you to the Supervisor level.

Access via code

A code is needed to access the Supervisor level.
Factory default: the code is 000.

Change code

You can change the Supervisor level access code to protect the tumble dryer from
unauthorised access.
Carefully enter a new code.
You will need to inform Miele if you have forgotten your new code. Miele will have to
reset the code.
Make a note of your new code and store it in a safe place.

Closing the settings menu

Touch the  sensor.

The display will go back to the previous menu level.
Touch the  sensor.

The display will switch to the main menu.

Controls / Display

Language

The display can be set to appear in one of several different languages. To select the
language you want, go to the Languages submenu.
You can change the language as follows:
- Permanently: in the Supervisor level (= "Supervisor language").
- Only for the duration of the current programme: via the  sensor. The supervisor
language is displayed again at the end of the programme.

Language entry

The display can be set to one of several different user languages. This setting allows you
to determine how languages can be selected.
You can change the language as follows:
11:02

Supervisor

Supervisor level

43