Pairing instructions
Follow the steps below to connect the tumble dryer to your network.
Opening the supervisor level
Select the
Supervisor
Select the
Access via code
Enter the 3-digit supervisor code.
Establishing the network connection via WPS
Select the
Supervisor level
Then select the
Select KOM module
If you are using an external communication module, select the
menu option.
Otherwise, select the
Select
.
WiFi
Select
.
Set up
Select the
Via WPS
Now press the WPS button on your router and confirm with
A timer starts. The network connection via WPS is being established.
The machine is now successfully connected.
Tap
to confirm.
OK
Establishing the network connection via soft AP
Select the
Supervisor level
Then select the
Select KOM module
If you are using an external communication module, select the
menu option.
Otherwise, select the
Select
.
WiFi
Select
Set up
.
Select the
via Soft AP
Confirm by pressing
Establishing the network connection using a LAN cable
Select the
Supervisor level
Then select the
Select KOM module
If you are using an external communication module, select the
menu option.
Otherwise, select the
Connect the machine to your router/switch using the network cable. The router/switch
must be connected to the Internet.
menu option in the machine display.
menu option.
menu option from the
menu option.
Int. module Domestic
connection method.
menu option from the
menu option.
Int. module Domestic
connection method.
OK
and follow the instructions in the external application.
menu option from the
menu option.
Int. module Domestic
External applications
menu option.
OK
External applications
menu option.
External applications
menu option.
Networking
menu.
Ext. module Professional
in the machine display.
menu.
Ext. module Professional
menu.
Ext. module Professional
73