Tip: Use a level to ensure correct alignment.
Securing the machine
The tumble dryer must be secured to the floor by installing the ten-
sioning strips supplied over the machine feet.
The material provided is intended for use in bolting the machine to a
concrete floor. If other floor types are present at the installation site,
the fastening material must be ordered separately.
Electrical connection
The electrical connection must be established by a qualified electri-
cian.
The machine must only be connected to an electrical supply pro-
vided in accordance with local codes and standards. Please also ob-
serve the regulations set out by your insurance provider and energy
supplier, accident prevention regulations, as well as recognized codes
of practice.
Reliable and safe operation of this tumble dryer is only ensured if it
has been connected to the electricity supply.
The required supply voltage, power rating, and fuse rating can be
found on the data plate on the tumble dryer. Ensure that the supply
voltage matches the voltage quoted on the data plate before con-
necting the machine to the electricity supply.
Connection to a supply voltage other than the one quoted on the
data plate can damage the tumble dryer if the voltage is too high.
Installation
49