NETGEAR S3600 Series User Manual page 639

S3600 Series 8- or 16-Port 10G/Multi-Gigabit Ethernet Smart Switch with 2 SFP+ Ports
Settings that you cannot change in the device UI are not included in the table but might
be included in the data sheet, which you can download by visiting
netgear.com/support/download/.
Table 106. Routing features default settings
Feature Name/Setting
IP Configuration
Routing mode
IPv6 Global Configuration
IPv6 unicast routing
IPv6 VLAN Configuration
IPv6 VLAN
IPv6 mode
DHCPv6 Client mode
Stateless Address AutoConfig mode
Admin mode
Duplicate address detection transmits
Life time interval
Adv NS interval
Adv reachable interval
Adv interval
Adv managed config flag
Adv other config flag
Router preference
Adv suppress flag
Destination unreachables
IPv6 Prefix Configuration
IPv6 prefix
IPv6 Static Route Configuration
IPv6 route
IPv6 Route Preference
Static
Software Default Settings and
Hardware Specifications
Default
Disabled
Disabled
An IPv6 VLAN configuration is automatically added after you
add a routing VLAN, but the IPv6 mode is disabled for the
routing VLAN.
Disabled
Disabled
Disabled
Enabled
1
1800
0
0
600
Disabled
Disabled
Medium
Disabled
Enabled
None configured
None configured
Local: 0
639 User Manual