NETGEAR S3600 Series User Manual page 383

S3600 Series 8- or 16-Port 10G/Multi-Gigabit Ethernet Smart Switch with 2 SFP+ Ports
If you did not yet activate your warranty, the Register to activate your warranty page
displays. For more information, see Register the switch on page 35.
3. Enter one of the following passwords:
• Enter your device admin password.
• If you previously managed the switch through the Insight Cloud Portal or Insight
app, enter the Insight network password for the last Insight network location.
For information about the credentials, see Credentials for the device UI on page 34.
4. Click the Login button.
The Dashboard page displays.
5. Select Security > Management Security > RADIUS > Global Configuration.
The Global Configuration page displays.
6. In the Max Number of Retransmits field, type the maximum number of times a
request packet is retransmitted to the RADIUS server.
The range is from 1 to 15. The default setting is 4.
7. In the Timeout Duration field, type the time-out value, in seconds, for request
retransmissions.
The range is from 1 to 30. The default setting is 5.
8. From the Accounting Mode menu, select to enable or disable the accounting mode
on the current primary RADIUS server:
• Disable: The accounting mode is disabled on the active (current) server. This is
the default setting.
• Enable: The accounting mode is enabled on the active (current) server.
9. Click the Apply button.
Your settings are saved.
The following table describes the view-only fields on the page.
Table 73. Radius configuration information
Field
Current Server IP Address
Number of Configured Servers
Manage Switch Security
Description
The IP address of the current RADIUS server. This field is blank if no servers
are configured.
The number of configured RADIUS servers. The number can range from
0 to 3.
383 User Manual