Manage Dhcp Pools; Add A Dhcp Pool Or Dhcp Binding - NETGEAR S3600 Series User Manual

S3600 Series 8- or 16-Port 10G/Multi-Gigabit Ethernet Smart Switch with 2 SFP+ Ports
If you did not yet activate your warranty, the Register to activate your warranty page
displays. For more information, see Register the switch on page 35.
3. Enter one of the following passwords:
• Enter your device admin password.
• If you previously managed the switch through the Insight Cloud Portal or Insight
app, enter the Insight network password for the last Insight network location.
For information about the credentials, see Credentials for the device UI on page 34.
4. Click the Login button.
The Dashboard page displays.
5. Select System > DHCP Services > DHCP Server > DHCP Server Configuration.
The DHCP Server Configuration page displays.
6. Click the Add New button.
The Add Excluded Address pop-up window displays.
7. In the IP Range From field, type the lowest address in the range or a single address
to be excluded.
8. In the IP Range To field, do one of the following:
• Exclude a single IP address: Type the same IP address that you typed in the IP
Range From field.
• Exclude a range of IP addresses: Type the highest address in the range.
9. Click the Save button.
Your settings are saved.

Manage DHCP pools

You can set up and manage different types of pools of IP addresses that the DHCP
server can assign.

Add a DHCP pool or DHCP binding

You can add multiple pools from which the DHCP server can assign IP addresses to
clients. You can also add multiple DHCP bindings.
To add a DHCP pool or a DHCP binding:
1. Connect your computer to the same network as the switch.
Configure Switch System
Settings
125 User Manual