Change The Criteria For An Existing Ipv6 Diffserv Class - NETGEAR S3600 Series User Manual

S3600 Series 8- or 16-Port 10G/Multi-Gigabit Ethernet Smart Switch with 2 SFP+ Ports
11. To add more criteria to the IPv6 DiffServ class, repeat the previous step.
You can add multiple criteria to a single IPv6 DiffServ class.
12. Click the Apply button.
Your settings are saved.
The following table describes the view-only fields in the Class Summary section.
Table 69. IPv6 DiffServ class configuration class summary
Field
Match Criteria
Values

Change the criteria for an existing IPv6 DiffServ class

You can change the criteria for an existing IPv6 DiffServ class.
To change the criteria for an existing IPv6 DiffServ class:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network,
or connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser and enter the IP address of the switch in the address field of
your web browser.
If you do not know the IP address of the switch, see Access the switch on-network
and connected to the Internet on page 25 or Access the switch off-network and not
connected to the Internet on page 32.
The Device Admin Password page displays.
If you did not yet activate your warranty, the Register to activate your warranty page
displays. For more information, see Register the switch on page 35.
3. Enter one of the following passwords:
• Enter your device admin password.
• If you previously managed the switch through the Insight Cloud Portal or Insight
app, enter the Insight network password for the last Insight network location.
For information about the credentials, see Credentials for the device UI on page 34.
4. Click the Login button.
The Dashboard page displays.
5. Select QoS > DiffServ > IPv6 Class Configuration.
The IPv6 Class Configuration page displays.
Configure Quality of Service
Description
The configured match criteria for the specified class
The values of the configured match criteria
369 User Manual