Download A File To The Switch; Download A File From A Tftp Server To The Switch - NETGEAR S3600 Series User Manual

S3600 Series 8- or 16-Port 10G/Multi-Gigabit Ethernet Smart Switch with 2 SFP+ Ports
The Dual Image Configuration section displays which software image is currently
the active image.
The Activate button displays for the new image that is not currently the active
image but that you want the switch to run after it reboots.
b. Click the Activate button.
The Active Dual Image Configuration pop-up window displays.
c. Click the Activate & Reboot button.
The File Management page refreshes and displays the Reboot Now button.
d. Click the Reboot Now button.
The switch reboots.
e. Click the OK button to close the window.
f. After the switch completes its reboot, verify that the switch runs the newly activated
image.
On the Dashboard page, the Firmware Version field displays the firmware image
that the switch runs.

Download a file to the switch

You can download software, configuration (ASCII), log (ASCII log), SSL, PEM, or other
types of files to the switch from a file server over a TFTP session, from a computer over
an HTTP session, or from a USB storage device.
For information about downloading software (firmware) and updating the switch
firmware, see Update the switch software on page 537.
Note the following about SSH and SSL files:
• SSH: For you to be able to download SSH files to the switch, SSH must be
administratively disabled and no active SSH sessions must occur.
• SSL: SSL files contain information to encrypt, authenticate, and validate HTTPS
sessions. For you to be able to download SSL files to the switch, HTTPS must be
administratively disabled.
Download a file from a TFTP server to the
switch
You can download a software (firmware) image, text configuration, X.509 certificates,
and SSHv2 key files from a TFTP server on your network to the switch.
Maintenance and
Troubleshooting
542 User Manual