Check Before Power-On; Eu Declaration Of Conformity - Goodwe MIS Series Quick Installation Manual

EN
3. Unauthorized dismantling or modification may damage the equipment, the damage is
not covered under the warranty.
4. Do not touch the running equipment to avoid being hurt as its temperature may exceed
60℃. Do not install the equipment at a place within children's reach.
5. Install the product away from electromagnetic interference. If there is any radio or
wireless communication equipment below 30MHz near the equipment, you have to:
• Add a low pass EMI filter or a multi winding ferrite core to the DC input cable or AC
output cable of the inverter.
• Install the inverter at least 30m far away from the wireless equipment.
6. Warning labels on the inverter are as follows.
High-temperature hazard. Do
not touch the product under
operation to avoid being
burnt.
Read through the user
manual before any
operations.
Do not dispose of the inverter
as household waste.Discard
the product in compliance
with local laws and
regulations, or send it back to
the manufacturer.
CE mark

Check before Power-on

No.
The product is firmly installed at a clean place that is well-ventilated and easy-to
1
operate.
2 The PE, DC input and AC output cables are connected correctly and securely.
3 Cable ties are intact, routed properly and evenly.
4 Unused ports and terminals are sealed.
5 The voltage and frequency at the connection point meet the on-grid requirements.

EU Declaration of Conformity

GoodWe Technologies Co., Ltd. hereby declares that the inverter with wireless communication
modules sold in the European market meets the requirements of the following directives:
• Radio Equipment Directive 2014/53/EU (RED)
• Restrictions of Hazardous Substances Directive 2011/65/EU and (EU) 2015/863 (RoHS)
• Waste Electrical and Electronic Equipment 2012/19/EU
• Registration, Evaluation, Authorization and Restriction of Chemicals (EC) No 1907/2006
(REACH)
You can download the EU Declaration of Conformity on
Delayed discharge. Wait
5 minutes after power off
until the components are
completely discharged.
Potential risks exist. Wear
proper PPE before any
operations.
RCM mark
TÜV mark
Check Item
https://en.goodwe.com.
02