Controlling Ptz Camera - RGBlink mini-edge User Manual

3.7 Controlling PTZ Camera

mini-edge can control the camera's lens moving horizontally and vertically, focus and zoom via
IP VISCA protocol and save the position and zoom information for quick calling.
The PTZ preset of mini-edge not only saves the parameters of the PTZ, but also includes calling
the camera, that is, when the preset of PTZ is loaded, the input is switched to the camera signal
source at the same time.
Push MENU Button to enter Main Menu.
Select【PTZ】to enter the interface.
mini-edge supports simultaneous control of up to four cameras.
Please check if the port number of the controlled camera is 1259 (It's recommended to use
RGBlink vue series PTZ camera). If the port number is not 1259, please enter the port number in
PTZ Control interface.
The following operations are explained with examples of using mini-edge to control ONE camera
© Xiamen RGBlink Science & Technology Co., Ltd.
| support@rgblink.com | www.rgblink.com
Ph: +86 592 5771197
41