Table of Contents
Advertisement
TYPICAL INSTALLATION AND USAGE
Prior to hardware installation, make sure you have the correct software installed on the Xavier or Orin
Module. Installation instructions can be found at https://connecttech.com/resource-center/kdb373/.
1. Ensure all external system power supplies are off.
2. Connect camera(s) and cables to the connector(s).
3. Switch ON the Power Supply. DO NOT power up your system by plugging in live power.
Document: CTIM-00094
Revision: 0.00
Page 13 of 16
NVIDIA Jetson SDI Vision Platform
Users Guide
www.connecttech.com
Date: 2024-01-10
Advertisement
Table of Contents
Need help?
Do you have a question about the CTi NVIDIA Jetson SDI Vision Platfrm and is the answer not in the manual?
Questions and answers