PIAGGIO MP3 530 hpe Service Station Manual page 254

Machine Translated by Google
MP3 530 hpe
CHANGING THE BRAKE PADS
- Remove the mechanical brake caliper.
- Remove the two fixing pins and the
Remove the brake pads from the brake caliper
Make sure you have the appropriate retaining spring
to withdraw.
- Check that the thickness of the friction material
is greater than the minimum value, otherwise replace
the brake pads.
Technical specifications
Minimum thickness of abrasive material
1,5 mm
- To install the brake pads, proceed in the reverse order
of removal.
- Clean the threads of the brake pad pins and apply
"LOCTITE 243" thread locking sealant and to the
specified torque
put on.
Torque guide values (N*m)
Brake pad pin 17.5 ± 2.5
Brake system
BREM - 257