PIAGGIO MP3 530 hpe Service Station Manual page 200

Machine Translated by Google
MP3 530 hpe
- Separate the housing halves. The must
Crankshaft in the housing half on the light
remain on the machine side.
- Remove the housing gasket.
ANNOTATION
THE LINERS CAN REMAIN IN THE HOUSING HALF ON
THE ALTERNATOR SIDE.
Removing the crankshaft
- Before removing the crankshaft, the phase
Alignment with the countershaft checked
become. The crankshaft must be checked for this check
be turned until the two holes
on the crankshaft to the hole on the gear
the countershaft are aligned.
This position is also ideal for expanding the
Crankshaft.
- The crankshaft together with the scraper disc
Remove on the alternator side.
DANGER
WHEN SEPARATING THE HOUSING HALFS AND REMOVAL
OF THE CRANKSHAFT, MAKE SURE THAT THE
THREADED PART OF THE CRANKSHAFT DOES NOT
DAMAGE THE CRANKSHAFT BEARINGS. FAILURE TO
COMPLY WITH THIS REGULATION MAY RESULT IN THIS
CAUSE THE CRANKSHAFT BEARINGS TO BE DAMAGED.
Removing the countershaft drive gear and oil pump
- To remove the drive gear, you must
4 fastening screws must be loosened.
Only remove the gear if it is loose
thing is required.
DANGER
THE SCREWS ARE COUNTERSUNK HEAD SCREWS
WHICH THREADS ARE BLOCKED WITH LOCTITE. ON THAT OH
ENSURE THAT THE ALLEN INSERT WILL NOT BE
DAMAGED. IF POSSIBLE, USE A SOCKET WRENCH
WITH A BUS ATTACHMENT.
Motor
AGAINST - 203