PIAGGIO MP3 530 hpe Service Station Manual page 248

Machine Translated by Google
MP3 530 hpe
Rear brake caliper
expansion
- In preparation, remove the exhaust end part
ren.
- The two fastening screws of the rear
Remove brake caliper.
- Remove the brake caliper from its seat on the bracket
take.
ANNOTATION
IF THE BRAKE DISC IS REPLACED OR OVERHAUL
THE CIRCUIT IN CONJECTION MUST BE CLOSED
DRAIN AND LOOSEN THE FASTENING OF THE
OIL CONNECTOR BEFORE REMOVALING THE BRAKE
CALIPER FASTENERS TO THE HOLDER.
Installation
- The brake caliper in its seat on the bracket
to install.
- Clean the threads of the fastening screws and apply
"LOCTITE 243" thread locking agent
Apply sealant and with the specified
Tighten torque.
- Install the exhaust end part.
Torque guide values (N*m)
Fastening screw brake caliper rear wheel brake 42.5 ± 2.5
Brake caliper front brake
Brake system
BRAKE - 251