PIAGGIO MP3 530 hpe Service Station Manual page 119

Machine Translated by Google
Engine out of the vehicle
- Remove the exhaust manifold while keeping it on top
Pay attention to the lambda sensor wiring harness
to pull out.
INSTALLATION OF COMPLETE EXHAUST
- If necessary, the lambda sensor on the exhaust
install manifold.
Torque guide values (N*m)
Fastening lambda probe 25 ± 5
- Install the exhaust manifold on the vehicle,
Pay attention to the lambda sensor when in
not to damage the installation.
-Screw on the two nuts of the exhaust flange
ben.
- Connect the lambda sensor cable connector
and attach it to the appropriate bracket.
MOT DRIVING - 122
MP3 530 hpe