PIAGGIO MP3 530 hpe Service Station Manual page 11

Machine Translated by Google
Checks before delivery
STATUS ASR-SYSTEM
ASR ACTIVE and calibrated
ASR ACTIVE not calibrated
ASR intentionally deactivated
ASR does not work (malfunction)
ASR programming phase (successful)
ASR-Programmierphase
(not successful)
CALIBRATION PROCEDURE ASR SYSTEM
Calibrate the ASR system before driving the vehicle
is delivered to the customer. It is advisable,
the procedure also after the replacement
one or more tires.
• Wait until the diagnostic phase of the systems
ASR and ABS is completed;
• Start the engine and drive in a short straight line
Distance on a flat road at more than 5 km/h
(3.1 mph) and the blinker goes out
Wait for the ABS warning light to turn off. If the
Tires need to be changed, wait until
The ASR warning light also stops flashing.
• Stop and let the engine idle at least
Run for 5 seconds ;
• Press the ASR «1» button and select one of the
Brake lever pulled for at least 7 seconds
hold on.
CON OUT - 14
HOW THE ASR WARNING LAMP WORKS
ASR WARNING LAMP
WHEN OFF
ENGINE OR KEY
ON«ON»
«ASR» symbol: flashes slowly at
1 Hz
-
«ASR» symbol: lights up permanently «ASR» symbol: lights up permanently
«ASR» symbol: lights up permanently «ASR» symbol: lights up permanently
-
-
ASR WARNING LAMP
WITH THE ENGINE RUNNING
AND DRIVING
VEHICLE
«ASR» symbol: Off
tet
«ASR» symbol: lights up permanently «ASR» symbol: flashes quickly
«ASR» symbol: flashes slowly at
1 Hz; at the next start
of the motor, symbol switched off
if the programming is successful.
«ASR» symbol: lights up permanently
the next time you start the
Motors if the programming was
not successful.
MP3 530 hpe
ASR DURING
DRIVING IN OPERATION
(CONDITION LOWER
GROUND GROUND)
«ASR» symbol: flashes quickly
5 Hz
5 Hz
-
-
-
-