PIAGGIO MP3 530 hpe Service Station Manual page 150

Machine Translated by Google
MP3 530 hpe
Installing the bearings in the rear gearbox cover
- The bearing seats on the rear wheel gear cover
Heat with a heat gun.
- The rear gearbox cover with the columns
support sentence.
Special tool
020151Y hot air gun
020476Y screw bolt
- The bearing of the countershaft with the specified
Use a special tool in the rear wheel gear
insert cover.
ANNOTATION
THE BALLS MUST EXIT FROM THE REAR WHEEL GEAR
BE VISIBLE (THIS REQUIREMENT APPLIES TO ALL
WAREHOUSES WITH PLASTIC CONTAINERS).
Special tool
020376Y Handle for adapter
020360Y Adapter 52 x 55 mm
020363Y Guide 20 mm
- The bearing seat of the wheel axle bearing from the Au
Heat the outside of the rear wheel gear cover.
- The wheel axle bearing with a suitable blow
mandrel into the rear wheel gear as far as it will go
insert cover.
Special tool
020376Y Handle for adapter
020360Y Adapter 52 x 55 mm
020483Y Guide (30mm)
- Install the snap ring.
Motor
AGAINST - 153