PIAGGIO MP3 530 hpe Service Station Manual page 12

Machine Translated by Google
MP3 530 hpe
• Activating the process for learning
the wheel diameter or for ASR calibration
is indicated by the ASR control lighting up
Lamp «2» confirms with slow flashes
tight.
• At a constant speed of
30÷40 km/h (18.6÷24.8 mph) accelerate and
hold this for at least 8 seconds . The Bei
maintaining vehicle speed in the correct range to
complete the procedure
is indicated by faster flashing of the ASR con
Troll lamp «2» confirmed.
• The end of the process is marked by the sale
The ASR indicator lamp «2» is displayed
and the ASR system is now functional.
• To save the process, the engine
by turning the ignition key to the position
Switch off "OFF" and wait at least 60 seconds
before turning it to «ON» again
Wait until a gear is engaged.
• Complete the process within 5 minutes when the ASR indicator light «2» lights up steadily
remains, it means that the procedure failed.
Therefore, the calibration process of the ASR must be repeated until a positive result is obtained.
Regarding the ASR indicator light after detection:
•
•
ANNOTATION
HOWEVER, THE SYSTEM IS ABLE TO PERFORM AN AUTOMATIC CALIBRATION AFTER A TIRE
CHANGE.
Aesthetic control
Aesthetic control:
- Lack
- Fitting the plastic parts together
- scratches
Procedure OK: ASR indicator light OFF and system active. If the ignition switch is...
next time it is set to "ON", the new wheel diameter will be saved.
Procedure failed: ASR INDICATOR LAMP SOLID ON and system active
(for safety) with previously recorded wheel diameter value or standard value (if never
previously recorded).
Checks before delivery
CON OFF - 15