PIAGGIO MP3 530 hpe Service Station Manual page 193

Machine Translated by Google
Motor
Loctite 243 Medium strength thread locking sealant.
Colour blue
- Insert the camshaft bracket (the beveled part must be visible) and the 3 fasteners
Tighten the connection screws to the specified torque. Make sure that the Allen key
screw is not damaged.
Torque guide values (N*m)
Camshaft bracket fixing screws: 4 ÷ 6
- The intermediate gear with torque limitation
Zer, the fly magneto and the light
machine cover as in the chapters - Lichtma
engine and starter system and chapter -
Install the alternator cover as described.
ANNOTATION
IT IS EASIER TO INSTALL THE ALTERNATOR COVER
WITHOUT THE COOLING SYSTEM HOSES.
- Connect the chain to the valve control sprocket
put on the camshaft.
- The valve timing gear ring on the cams
put on the shaft. The two Marks have to do this
ations remain aligned with one another.
ANNOTATION
WHILE CHECKING THE PHASE ALIGNMENT, THE
CHAIN MUST BE KEPT UNDER TENSION BY PRESSURE
FROM THE TENSIONER ROOM.
- Use a TORX key to tighten the lock
the inspection opening for phase adjustment
with.
- Keep the chain slightly taut and the crank
Turn the shaft over the drive belt pulley as far as possible
until the mark on the magnet holder
on the marking on the alternator cover
is directed.
AGAINST - 196
MP3 530 hpe