Related Manuals for Holman 12908
Summary of Contents for Holman 12908
- Page 1 Instruction Guide 12908 Holman Rancho Cordova, CA 95742 800-343-7486 InstallationSupport@Holman.com 20240105R1 DATE: ________________...
- Page 2 Step 1B – Prepare Tube Clamps - 1-5/8” Diameter Leg ..............2 Step 2 – Install Window Guard ......................3 Before You Begin • Read all instructions prior to assembling or installing any Holman product. • Always locate your installation locations prior to performing any work. Parts...
- Page 3 Instructions – 12908 Hardware Step 1A – Prepare Tube Clamps - 2” Diameter Leg 1/32” Thick Tape Strip This step assumes installation to rack with 2” diameter legs. • Dry wipe clean inside diameter of two tube clamps. • Remove plastic backing from a 1/32” thick tape strip and install strip onto inside diameter of tube clamp.
- Page 4 Instructions – 12908 Step 2 – Install Window Guard Note: The following images show 2” diameter tubing installation. • Place tube clamps around the front legs of rack with flat end of flange towards the front. • Put and hold window guard into position with flat face facing towards the rear.
Need help?
Do you have a question about the 12908 and is the answer not in the manual?
Questions and answers