Installing The Ce Hood Lock - Toro Reelmaster 5610-D Operator's Manual

5

Installing the CE Hood Lock

Parts Required
1
1
1
1
1. Raise the hood.
2. Remove the rubber grommet
in the left side of the hood.
3. Ensure that the seal
hood lock
4. Remove the nut
5. Outside the hood, insert the hook end of the
latch through the hole in the hood.
Note:
hood.
6. Inside the hood, secure the lock to the hood
with the washer
7. Close the hood, and use the enclosed hood-
lock key to check that the hook of the lock
engages the frame catch when locked.
Setup: Installing the CE Hood Lock
Hood lock
Seal
Jam nut
Washer
is assembled to the
.
from the lock.
The seal is aligned to the outside of the
and nut.
from the hole
G439569
G445763
Page 3–13 3464-486 A