Toro Reelmaster 5610-D Operator's Manual page 53

Overview of the InfoCenter Display (continued)
2. In Settings, scroll to Enter PIN and press the
select button
3. To enter the PIN code, press the up/down
navigation buttons
appears, then press the right navigation button
to move on to the next digit. Repeat this
step until the last digit is entered.
4. Press the select button
Note:
the protected menu is unlocked, the word
"PIN" displays in the upper right corner of the
screen.
5. To lock the protected menu, rotate the key
switch to the O
position.
Viewing and Changing the Protected Menu Settings
1. In Settings, scroll down to Protect Settings.
2. To view and change the settings without entering a PIN code, use the select button to
change the Protect Settings to
3. To view and change the settings with a PIN code, use the select button to change the
Protect Settings to
the O
FF
Setting the Service Due Timer
The service due timer resets the service due hours after a scheduled maintenance
procedure is performed.
1. In Settings, scroll to Enter PIN and press the select button.
2. Enter PIN; refer to Accessing Protected Menus.
3. In Service, navigate to Hours and press the select button.
4. Scroll down to Service Due.
Note:
5. Highlight the service interval and press the select button.
Note:
Service interval is a protected menu item.
6. When the R
back button for N
3464-486A
.
until the correct first digit
.
If the display accepts the PIN code and
position and then to the O
FF
(On), set the PIN code, and turn the key in the ignition switch to
position and then to the O
If service is currently due, Now appears next to Service Due.
The service interval (250 Hrs, 500 Hrs, etc) is located next to Service Due.
S T
ESET ERVICE IMER
.
O
N
G471350s
(Off).
position.
N
? screen appears, press the select button for Y
Page 5–11
or the
ES
Operation: Before Operation