Priming The Fuel System - Toro Reelmaster 5610-D Operator's Manual

Cleaning the Fuel-Pickup Tube Screen (continued)
5. Assemble the hose
the fuel sender, and secure the hoses to the
fittings with the clamps
6. Plug the connector of the fuel-sender harness
into the connector of the machine wire
harness
7. Install the fuel-sender cover
using the 5 screws

Priming the Fuel System

Prime the fuel system after the following scenarios:
• Replacing the fuel filter.
• Draining the water separator after each use or daily.
• Running out of fuel.
• Replacing a fuel hose or open the fuel system for any reason.
To prime the fuel system, perform the following steps:
Maintenance: Fuel System Maintenance
onto the fittings
.
.
to the fuel tank
.
of
G415057
G415056
G415055
Page 6–23 3464-486 A