Safety Instructions - Scanprobe Maxprobe User Manual

Safety Instructions

This chapter illustrates the safety requirements that should always be adhered to when
operating or maintaining any product purchased from Scanprobe Techniques Limited or one
of their authorised agents. Please take the time to read and understand all the instructions
within this document.
Warning: Risk of Explosion
Explosive atmospheres can be caused by flammable gases, mists, or vapours or
by combustible dusts. Pipelines containing potentially explosive atmospheres
should only be surveyed using appropriately certified equipment and by
operators trained in the techniques necessary to safely survey such pipelines.
To undertake pipeline surveys in potentially explosive atmospheres, contact
Scanprobe Techniques Ltd to discuss alternative equipment designed for such
environments.
Warning: Risk of Environmental Contamination
Contamination of drinking water sources by sewage can occur when wastewater
inspection systems are used in freshwater pipelines. Never use an inspection
system alternately between wastewater and freshwater surveys, as cleaning
your inspection system is not sufficient to sanitise the equipment. Always use a
dedicated freshwater inspection system to survey freshwater pipelines.
Warning: Risk of Infection
Workers whose activities bring them into contact with sewage and sewage
products are at risk of contracting a work-related illness. Most illnesses are
relatively mild cases of gastroenteritis, but potentially fatal diseases, such as
leptospirosis (Weil's disease) and hepatitis have been reported to HSE. Before
undertaking any form of work where there is a risk of contact with sewage and
sewage products, make sure you understand the risks to health and the ways
you can pick up infections, use safe systems of work and wear appropriate
protective equipment. Further information can be obtained the Employment
Medical Advisory Service at any HSE area office within the UK, or through the
HSE website at www.hse.gov.uk.
Warning: Risk of Electric Shock
When using electrical equipment, basic safety precautions should always be
followed to reduce the risk of fire, electric shock, and personal injury.
Warning: Risk of Damage to Eyes and Eyesight:
The Maxprobe System features bright LED illumination on the camera head
which may cause damage to the eyes or to eyesight when illuminated. Do not
look directly at them or point them at other people's eyes when illuminated.
Warning: Risk of Injury
The fully kitted Maxprobe systems range from 32kg to 58kg. Observe safe lifting
procedures when lifting or moving any components of this system and use two-
person lifts where appropriate.
Maxprobe User Manual
Version 2.0
22 November 2023
7