Repairs - Scanprobe Maxprobe User Manual

Maxprobe User Manual
40
and other wear and tear on the components while in use to significantly extend the
operational life of the system and it will help to minimise repairs.
Do not force the connectors together, as this may break the pins.
Always use the provided protection caps when transporting and ensure that cables do not
get tangled up. Never deliberately bend any of the attached cables. Perform a visual
inspection of the cables prior to use and get the cable repaired or replaced as soon as any
damage occurs or is found.
After use, the Maxprobe CCU should be recharged by connecting the charging leads to a
suitable external 12V or mains power source.

Repairs

Warning:
The Maxprobe Systems have no user repairable parts. Opening the system
enclosures may be dangerous and is liable to damage or destroy the seals
protecting the equipment.
Due to the specialist knowledge and tools required to repair and reseal the Maxprobe
system components, any repair work should only be undertaken by Scanprobe Techniques
Limited, agents explicitly authorised by Scanprobe Techniques Limited, or following explicit
direction from Scanprobe Techniques Limited.
Undertaking repair or modification work without Scanprobe Techniques Limited consent and
authorisation is forbidden. Undertaking any unauthorised repair or modifications to the
Maxprobe System will invalidate the warranty.
Version 2.0
22 November 2023